Sunwayman P25C XM-L2 U2 1,000 Lumens Compact 18650 Flashlight

(No reviews yet) Write a Review
Calculated at Checkout

The Sunwayman P25C is another budget compact super-bright 18650 flashlight in the same vein as our best-selling Acebeam EC32. Great for novice users or buyers on a budget



● CREE XM-L2 U2 LED, with a lifetime of up to 50,000 hours;
● Tactical Tail cap press button switch, slightly depress the side switch for different output modes :
One Turbo Mode, Three Modes constant output, Hidden Strobe ,SOS,Aviation Signal functions (below is the output and runtime of using two CR123A batteries or one single 18650)
Turbo Mode (2*CR123A batteries): 1000 Lumens 
Three constant output modes (1*18650 battery): 300Lumens (3hrs) - 137Lumens (7.5hrs) - 84Lumens (12hrs)
Aviation Signal
● Constant current circuit, constant output
● Effective range of 208 meters
● Uses one single 18650 or two CR123A batteries
● Working voltage: 2.8~8.4V
● High quality metal smooth reflector maintains great throw distance and spread with an ideal beam pattern
● Dimensions: 141mm (length) x 25.4mm (head diameter) x 25.4mm (tail diameter)
● Weight: 90g(battery excluded)
● Aerospace-grade aluminum alloy, Stainless Steel retaining ring on the top
● Military Specification Type III- hard anodized body
● Waterproof, in accordance with IPX-8 standard 
● Ultra-clear tempered glass lens resists scratches and impacts
● Tactical forward click switch for momentary on
  • ● Accessories: Clip,Lanyard ,O-rings


Slightly half-depress the tail cap switch button to turn on the light and release to turn it off.
Turn on the light: Fully depress the tail cap switch button until a “click” sound is heard to turn on the light.
Turn off the light: Fully depress the tail cap switch button again until a “click” sound is heard to turn off the light.
3.Output Selection
When the light is turned on, each depress of the mode switching button for one output mode, it cycles through “Low-Mid-High-Turbo”.
Note: The light will lower from Turbo to High after 3 minutes continuous use to avoid overheat so as to effectively protect battery.
4.Functions Selection (Strobe/SOS/Aviation Signal)
When the light is turned on, depress and hold the switch button for more than 1 second, the light enters Strobe, if you need other functions, perform the same operation, the light cycles through “Strobe-SOS-Aviation Signal”. Slightly depress the button once to return back to regular output mode.
Note: P25C has memory function, when the light is turned on from off; it enters the very last mode used automatically. (Excluding SOS and Aviation Signal)


2 Years Full Repair Warranty