The new Manker T01S features a new design compared to the old T01 Mark 2. This is still the most powerful thrower in this form factor, Manker has not released the official maximum beam distance yet so we have used the old specifications from the T01 Mark 2 as an estimate (280 meters).
Emitter: CREE XPL HI LED (CW and NW for your choices)
Maximum 420 lumens output, power by 1x AA battery (NW version output is about 20% less than CW)
Maximum 800 lumens output, power by 1x 14500 battery (NW version output is about 20% less than CW)
Driver: Most efficiency constant current circuit, maximum runtime up to 300 hours
Material: Aircraft-grad 7075 aluminum body
Surface treatment: Premium Type III hard-anodized anti-abrasive finish
Clip: Titanium coated stainless steel clip
Lens: Toughened ultra-clear glass lens with anti-reflective coating
With reversible & removable Stainless Steel Bezel
Forward Clicky Tail Switch
Dimensions: 105mm (length) x 35mm (Head diameter)
Weight: 75gram (without battery)
Accessories: o-ring *1, lanyard *1, pocket clip *1
Brightness levels & Runtime:
Powered by 1x 2500mA AA NiMH battery
Working voltage: 0.8v-1.6v
Moonlight 0.5lm 300hrs,
Low 5lm 13hrs,
Middle 58lm 5.5hrs,
High 220lm 1.5hrs,
Turbo 420lm 1.3hrs.
Powered by 1x 3.7V 750mAh 14500 battery
Working voltage: 2.7v - 4.2v
Moonlight 7lm 90hrs,
Low 45lm 12hrs,
Middle 100lm 3.5hrs,
High 270lm 1hrs,
Turbo 800lm, 0.5hrs.
Forward clicky tail switch,
On/Off: Click for on and off, 5 output mode in total.
Change modes: click within 0.64 seconds to change modes, the light will memory your last mode if the time get over 0.64 seconds between two clicks.