EagleTac TX3G Pro XHP70.2 P2 2,500 Lumens Rechargeable USB-C Flashlight

(No reviews yet) Write a Review
Calculated at Checkout


Head Dia.
1.3 inches (33 mm)
Body Dia.
1.2 inches (31 mm)
5.4 inches (138 mm)
6.9 ounces (195 grams)

Battery Type

Operating voltage

  • 2.7V - 4.2V

What's included

  • TX3G Pro flashlight
    • Crenulated Stainless steel bezel
    • L1900 Type-C charging circuit
    • Rigid nylon holster w/ self-retention device
    • Add-on diffuser filter with flip-cover feature
    • (US only) UL certified 5V 2A USB charger
    • (EU only) TUV/GS/CE certified 5V 2A USB charger
  • 3.7V 5200mAh 26650 rechargeable unprotected li-ion battery
  • Spare o-rings
  • User Manual
  • Mil-Spec Para-cord Lanyard w/ quick attachment clip
  • Flat tail-stand tailcap
  • Type-C USB charging cable (3.3feet/1meter) w/ AWG24 copper wire

Carrying method

  • Para-cord lanyard with quick attachment clip


  • IPX-8 standard


  • Smooth aluminum reflector


  • HAIII hard anodization aerospace aluminum


  • Waterwhite glass lens w/ harden treatment
  • Multi-layers low color distortation anti-reflective (A.R.) coating on both side (98% transparency) to prevent reflections and color shadow

Optional accessories

  • 3.7V 26650 5200mAh li-ion unprotected battery
  • 5V USB car charger
  • Lens


    • CREE XHP70.2 P2 Cool White LED
    • CREE XHP70.2 Neutral White LED

Max output

  • CREE XHP70.2 P2 Cool White LED
    • LED lumen: 3000
    • ANSI FL-14 lumen: 2500

Beam Profile

CREE XHP70.2 P2 Cool White LED 

  • Center lux: 9,350 lux
  • Center spot angle: x°
  • Spill light angle: x°
  • Beam distance: 211 yards / 193 meters

LED circuit

  • W2500 Ultra
    • Current regulated output for all brightness levels
    • Active thermal management feature (adjustment range 70%-100%)5
    • Synchronous boost controller with ultra low resistance mosfet which offers up to 95% efficiency
    • High switching frequency convertor for more compact circuitry design
    • Non-dimming constant current regulation for all output levels without flicking
    • Very low standby current (negligible)
  • Built-in battery protection programming
    • At 2.8V, LED driver lowers the MAX output to the second highest level to extend runtime
    • Low voltage warning at 2.7V (lowers output to the lowest level to extend remaining runtime)
    • Built-in shut down voltage at 2.7V (if voltage reaches 2.7V at the lowest level, the flashlight will turn off)

Built-in battery protection PCB

  • P8000 Guard
    • Over-discharge protection at 2.5V
    • Over-charge protection at 4.275V
    • MAX continuous discharge current 8A
    • MAX Pulse discharge current 12A
    • Flashlight short-circuit protection
    • Battery polarity reversal protection
    • Cut-off with battery cathode for maximum protection
    • Reset all protection by reloading and/or charging the battery

Charging circuit

    • L1900 Type-C
      • 5V USB input (requires 2A or higher)
      • Triple mosfet design for maximum efficiency
      • 1.9A MAX charging current
      • Uses the latest standard type-c usb charging plug, supports bi-direction insert
      • Constant current / Constant voltage charging logarithm
      • Small current charging for low voltage battery (less than 2.9V)
      • Extends battery cycle life by charging battery that reads 4.1V or lower
      • Precise voltage detection design +/- 1%
      • No trickle charge
      • Smart charging level report system

Battery level report

      • A blue LED indicator under the main switch reports the estimated battery remaining capacity
        • Flash once: lower than 10%
        • Flash twice: 30%-50%
        • Flash 3x times: 50%-70%
        • Flash 4x times: higher than 70%

Charging level report (charging)

    • A blue LED indicator under the main switch reports current charging level
      • Flash once: lower than 50%
      • Flash twice: 50%-75%
      • Flash 3 times: >75%
      • Constant on: 100% (done)

Output and Runtime

  • CREE XHP70.2 P2 Cool White LED
    • Led lumen:
    • ANSI FL-1 lumen:
    • Runtime: 
      1-1.4/2.8/5.7/24/300 hours6
  • Three hidden auxiliary outputs7
    • Disorienting Strobe/Beacon (1.67Hz)/S.O.S.


Basic operations:
  • Turn on the light at MAX output by pressing the BLACK button switch.
  • Turn on the light at LOWEST (programmable) output by pressing the WHITE button switch
  • To turn off the light anytime, press and release the BLACK button switch.
  • To program the LOWEST startup output, switch to the desired output level and continuously pressing and holding the button for three seconds until the side LED turns on.
  • For MAX output momentary on, press and hold the BLACK button switch for immediate output.
  • To switch between different brightness levels, press and release the WHITE button switch when the flashligh is on.
  • To enter hidden auxiliary levels, cycle through at least two cycle of regular output.
  • For instant MAX output - at any output level, press and hold the BLACK button switch. Release the button to return to previous level.
  • For instant Strobe output - at any output level (even) off), double press and hold the BLACK button switch. Release the button to return to previous level (or off).

  • Remove the waterproof silicon cap and insert the charging power plug to charge.
  • Blue side LED indicates the battery is being charged. It reports charging percentage by blinking.


Other features

  • LED direct soldering on copper for maximum heatsink ability
  • User replaceable glass lens
  • Battery reverse polarity protection
  • Ultra low internal resistance phosphor bronze springs (silver coated)
  • Spring loaded positive and negative terminal
  • Tail stand