EagleTac DX3B Mini Pro XHP-50.2 J4 1,700 Lumens 18650/18350 Convertible USB Rechargeable Tiny Monster Cool White/Neutral White (Includes 18350 Battery & Extension Tube)

S$130.00
(No reviews yet) Write a Review
Shipping:
Calculated at Checkout
Comments

Technical Specifications

Dimensions

Head Dia.
0.9 inches (22.5 mm)
Body Dia.
0.85 inches (22 mm)
Length:
3.4 inches (86 mm)
Weight
2.6 ounces (75 grams)1

Battery Type

  • 1 x 18350 (unprotected and button-top)2
  • IMR high-discharge li-ion type only
  • Compatible battery size (diameter/length)
    • 18-18.8mm/35-36mm
  • Read Warning regarding using and handling of unprotected li-ion batteries.
  • With included 18650 extension tube, DX3B Mini Pro can use button-top 1x18650 protected li-ion battery that measures 65 to 69.5mm long. Flashlight length with extension tube installed measures 4.6 inches (116mm). The 18650 battery and its protection board must withstand at least 10A current discharge.

Operating voltage

  • 2.7V - 4.2V

What's included

  • DX3B-M Pro flashlight
    • Crenulated stainless steel bezel
    • Harden stainless steel deep pocket
      two-way clip with titanium alloy dark vacuum coated finish
    • Tailstand tailcap with magnet
    • Battery extension tube for single 18650 li-ion battery
    • (US only) UL/PSE certified USB 5V 1A wall charger (100V-240V)
    • (EU only) TUV/CE certified USB 5V 1A wall charger (100V-240V)
    • Rigid nylon holster w/ self-retention device
  • 3.7V 800mAh IMR18350 rechargeable unprotected li-ion battery
  • Spare o-rings
  • User Manual
  • Mil-Spec Para-cord Lanyard w/ quick attachment clip
  • Micro USB USB charging cable (3.3feet/1meter) w/ AWG24 copper wire

Carrying method

  • Para-cord lanyard with quick attachment clip

Waterproof

  • IPX-8 standard

Reflector

  • Smooth aluminum reflector

Material

  • HAIII hard anodization aerospace aluminum

Lens

  • Waterwhite glass lens w/ harden treatment
  • Multi-layers low color distortation anti-reflective (A.R.) coating on both side (98% transparency) to prevent reflections and color shadow

Optional accessories

  • 3.7V IMR18350 li-ion unprotected battery
  • 5V USB car charger
  • Lens

Optional LED

  • CREE XHP35 HD E4 Cool White LED
    • LED lumen: 2000
    • ANSI FL-14 lumen: 1480
  • CREE XHP35 HI E2 Cool White LED
    • LED lumen: 1870
    • ANSI FL-14 lumen: 1380
  • CREE XHP35 HD Neutral White LED
  • CREE XHP35 HI Neutral White LED

LED

    • CREE XHP50.2 K2 Cool White LED
    • CREE XHP50.2 J4 Neutral White LED
    • CREE XHP35 HD E4 Cool White LED
    • CREE XHP35 HI E2 Cool White LED
    • CREE XHP35 HD Neutral White LED
    • CREE XHP35 HI Neutral White LED

Max output

  • CREE XHP50.2 K2 Cool White LED
    • LED lumen: 2480
    • ANSI FL-14 lumen: 1830
  • CREE XHP50.2 J4 Neutral White LED
    • LED lumen: 2310
    • ANSI FL-14 lumen: 1700
  • CREE XHP35 HD E4 Cool White LED
    • LED lumen: 2000
    • ANSI FL-14 lumen: 1480
  • CREE XHP35 HI E2 Cool White LED
    • LED lumen: 1870
    • ANSI FL-14 lumen: 1380

Beam Profile

CREE XHP50.2 K2 Cool White LED 

  • Center lux: 6,800 lux
  • Center spot angle: x°
  • Spill light angle: x°
  • Beam distance: 165 yards / 180 meters
CREE XHP35 HD E4 Cool White LED 

  • Center lux: 9,200 lux
  • Center spot angle: x°
  • Spill light angle: x°
  • Beam distance: 209 yards / 192 meters
CREE XHP35 HI E2 Cool White LED 

  • Center lux: 16,500 lux
  • Center spot angle: x°
  • Spill light angle: x°
  • Beam distance: 280 yards / 257 meters

LED circuit

  • W2200 SC - XHP50.2 LED
  • W1900 SC - XHP35 LED
    • Current regulated output for all brightness levels
    • Low voltage warning at 2.8V (lowers output to the lowest level to extend remaining runtime)
    • Built-in shut down voltage at 2.8V (if voltage reaches 2.8V at the lowest level, the flashlight will turn off)
    • Active thermal management feature (adjustment range 70%-100%)5
    • Synchronous boost controller with ultra low resistance mosfet which offers up to 95% efficiency
    • High switching frequency convertor for more compact circuitry design
    • Non-dimming constant current regulation for all output levels without flicking
    • Very low standby current (negligible)

Charging circuit

    • L1000 Micro
      • 5V USB input (requires 1A or higher)
      • Dual mosfet design for maximum efficiency
      • 1A MAX charging current
      • Uses the latest standard type-c usb charging plug, supports bi-direction insert
      • Constant current / Constant voltage charging logarithm
      • Small current charging for low voltage battery (less than 2.9V)
      • Extends battery cycle life by charging battery that reads 4.1V or lower
      • Precise voltage detection design +/- 1%
      • No trickle charge
      • Smart charging level report system

Battery level report

      • A blue LED indicator under the main switch reports the estimated battery remaining capacity
        • Flash once: lower than 10%
        • Flash twice: 30%-50%
        • Flash 3x times: 50%-70%
        • Flash 4x times: higher than 70%

Charging level report (charging)

    • A blue LED indicator under the main switch reports current charging level
      • Flash once: lower than 50%
      • Flash twice: 50%-75%
      • Flash 3 times: >75%
      • Constant on: 100% (done)

Output and Runtime

    • CREE XHP50.2 K2 Cool White LED
      • Led lumen:
        24805-1500/1100/420/150/25
      • ANSI FL-1 lumen:
        18305-1220/910/350/125/21
    • CREE XHP50.2 J4 Neutral White LED
      • Led lumen:
        23105-1400/1030/390/140/23
      • ANSI FL-1 lumen:
        17005-1140/850/325/120/19
    • CREE XHP35 HD E4 Cool White LED
      • Led lumen:
        20005-1320/860/340/135/25
      • ANSI FL-1 lumen:
        15005-1070/705/280/110/21
    • CREE XHP35 HI E2 Cool White LED
      • Led lumen:
        18705-1230/820/305/125/22
      • ANSI FL-1 lumen:
        14005-970/656/245/100/18
    • 18350 li-ion Runtime:
    • (XHP50.2) 0.15-0.25/0.35/1.2/3.5/20 hours
      (XHP35) 0.2-0.3/0.45/1.4/4/24 hours
    • 18650 (w/ extension tube) li-ion Runtime:
    • (XHP50.2) 0.8-1.2/1.8/5.5/17/100 hours
      (XHP35) 1-1.4/2.2/6.8/19/120 hours
  • Hidden auxiliary outputs7
  • Beacon (1.67Hz)

Operations

  • Turn on the light at MAX output by pressing and holding the on/off switch button
  • Turn on the light at LOWEST (programmable) output by pressing and release the switch button quickly (within 0.5 second)
  • (UPDATED) To program the LOWEST startup output, switch to the desired output level and WITHIN ONE SECOND switch off and on the flashlight for three times.
  • To turn off the light anytime, press and release the on/off button switch while it is on.
  • To switch between output levels, with the light turned on, press and hold the on/off switch for longer than 0.5 second to switch to next output. Press and hold the switch will cycle between all levels.
  • To access AUX blinking mode, with the light turned on, cycle through at least two sets of regular brightness level to enter


Charging:
  • Remove the waterproof silicon cap and insert the charging power plug to charge.
  • Blue side LED indicates the battery is being charged. It reports charging percentage by blinking.

Controls

Other features

  • LED direct soldering on copper for maximum heatsink ability
  • User replaceable glass lens
  • Battery reverse polarity protection
  • Ultra low internal resistance phosphor bronze springs (silver coated)
  • Spring loaded positive and negative terminal
  • Tail stand

Warranty